Maintenance
6-2
Eaton
®
Power Xpert 9395 Integrated Battery Cabinet (Model 1085 and 1085HR) Installation Manual 164201687—Rev 06
www.eaton.com/powerquality
2.
Ensure the air intakes (vents on the front door or panels) and the exhaust openings (on top of the battery
cabinet) are not blocked.
3.
Ensure the operating environment is within the parameters specified in paragraph 3.2.1.
6.2.2
BATTERY Maintenance
Contact your service representative for battery maintenance. Battery replacement and maintenance should be
performed only by authorized service personnel.
6.3
Installing Batteries
CAUTION
The 1085 and 1085HR batteries CANNOT be intermixed. Serious damage to equipment may
result.
Contact your service representative for battery maintenance. Battery replacement and maintenance should be
performed only by authorized service personnel. Install batteries in accordance with the battery and battery
cabinet or battery rack manufacturer's instructions.
6.4
Recycling the Used Battery or UPS
Contact your local recycling or hazardous waste center for information on proper disposal of the used battery
or UPS
WARNING
l
Do not dispose of the battery or batteries in a fire. Batteries may explode. Proper disposal of
batteries is required. Refer to your local codes for disposal requirements.
l
Do not open or mutilate the battery or batteries. Released electrolyte is harmful to the skin and
eyes. It may be toxic.
l
A battery can cause electrical shock, burn from high short-circuit current, or fire. Observe proper
precautions.
AVERTISSEMENT!
l
Une batterie peut presenter un risque de choc electrique, de brulure, ou d'incendie. Suivre les
precautions qui s'imposent.
l
Pour le remplacement, utiliser le meme nombre et modele des batteries.
l
L'elimination des batteries est règlementée. Consulter les codes locaux a cet effet.
CAUTION
Do not discard the batteries in the trash. This product contains sealed, lead-acid batteries and must
be disposed of properly. For more information, contact your local recycling/reuse or hazardous
waste center.
NOTE
There is no manual DC disconnect device within the UPS.
