Eaton Compressor POLAR AIR P01PSXXP07V080V208X, Руководство пользователя

Страница: 10 / 39

Operating Instructions
10
Minimum Pipe Size For Compressed Air Lines
(Pipe size shown in inches)
Air Drop
(typ. )
PLAN VIEW
Closed loop system
in piping from air
supply to minimize
pressure drop and
two directions.
From Compressor
Water trap
with dra in
Air Drop:
to minimize condensation in air drop
ELEVATION
From
Compressor
To Air Tool
7. For permanent installations of compressed air systems, determine total length of system and select correct
pipe size. Make sure underground lines are buried below frost line and avoid areas where condensation
could build up and freeze.
8. Test entire piping system before underground lines are buried. Be sure to find and repair all leaks before
using compressor.
One auto drain can be used for multiple compressor units. Install necessary piping with appropriate fittings.
Never exceed recommended pressure or speed while operating
compressor.
WARNING
Electronic Auto Drain
(if equipped)