QUICK START GUIDE
6
|
P a g e
17. Turn on the power of 3d printer
18. Then insert SD card and to choose one model to print.
D-11 : how to put glue and tape to the platform?
(
1
)
The way of putting PVP glue stick (as below images)
(a), use scraper knife to clean platform before putting stick, but if there are too much residue, please to wash it under the
running water.
(b). Open the glue stick, rotate the end of the glue sticks until see some glues showed, then apply a thin layer of glues
to the printing area
(c). This kind of glue belong to easily dried type, so can begin to print soon.
(2)The way of putting blue tape(as below images)
(a)To cut a piece of blue tapes as the similar same size of Blue tapes.
(b)To put the blue tapes gently and use eraser to press it to make sure they stick perfectly.
PVP Glue stick
Glass platform
Scraper knife