QUICK START GUIDE
5
|
P a g e
Completed
11. Get the handle parts from accessories box
12.Put them to the end of Z axis then drive the screw
tightly.
13.
Put glue on the platform by PVP glue sticks to assure the
models would not moved while printing, or to use the blue
tape on the platform
. (please find the detailed way of step
11 in the below called- D11)
14. Adjust the Platform to be levele
d
(Please find the
detailed way of step 14 below called -D12
)
15. Assemble the filament holder by screws(its in the
accessories box(
Please find the detailed way of step 13 in
the below called- D13
)
16. Put filament into the hose of 3d printer machine
.(please
find the detailed way of step 14 in the below-called D14)
M5 screw