Photo 8
Photo 9
Photo 10
Photo 11
2
：
slice the STL file
Use EASYWARE or CURA to slice the STL model file
。
Notice: the building volumn 150x150x150mm, nozzle temperature 180
℃
for PLA. Heated bed 50
℃
.
Nozzle 0.4mm, filament 1.75mm.
3
：
start to print
1),Save the sliced gcode file to a TF card , then insert the TF to TF port on machine.
2),Click hope page”Print”
，
choose the model you need to print, click“ confirm”
（
photo 8
）
3), When nozzle temperature goes up to a setted value ,The machine is printing
（
photo 9
）
3,
Change filament during printing
If you want to change filament during printing ,click “ option” to the operation page,
Click”change”, after the machine stops , click “ unload”, printer will take out current
filament, insert the new filament and click “ load “ till regular filament goes out of
the nozzle, Click “ back” to operation page, Click “ resume” the printer continue to
print with new filament.(photo 10, photo 11)
4,
Pause during printing
If pause need during printing, click “ pause” , then the machine stop printing ,
If need to print again, click “ resume”
5,
Stop printing
If stop need during printing , click “ Stop “ on the operation page, and “ confirm“ ,
printing stops , ( once stopped printing ,the current model printing can not go on )
6,Power cut continue printing
During printing, if power off suddenly , the printer will stop printing, when power on again,
click RESUME to continue printing.
7, printing completed
you can remove the platform from the printer, as below showing, easy to take off the model .
NOTICE
：
when you do head home by hand, pls move X,Y axis firstly, move the
Z axis at last, and keep the space more than 5mm between the nozzle and
the platform. This way avoid to break the nozzle.
Содержание Easythreed X5
Страница 1: ...X5 Use s Manual ...
