easyTherm highcomfort YP3.09997, Инструкции по установке и использованию

Страница: 15 / 29

28 29
EN
Activation
5 sec.
• Turn the selector knob to Off and hold the
right-hand button down for 5 seconds until
P441 is displayed (maintenance menu only for
installer).
• Press OK . The screen displays CF01 .
CF01 - Correction of room temperature
measurement
If there is a difference between the actual
temperature (taken with a thermometer) and
the temperature measured and displayed
by the unit, this menu can be used to
compensate for the difference (from -4°C to
+4°C in increments of 0.1°C) by changing the
way the sensor measures.
Press + or - to make the required adjustment, then OK to confirm
and go to the next menu.
CF02 - Choice of temperature display
in AUTO mode
Press + or - to make the required adjustment,
then OK to confirm and go to the next menu.
CF03 - Adjustment of comfort
temperature
Press + or - to make the required
adjustment, then OK to confirm and go to
the next menu.
CF04 - Frost protection for circulator
Press + or - to make the required
adjustment, then OK to confirm and go to
the next menu.
Continuous display of the set-point
Temperature displayed
Continuous room temperature
display
Anti-seizing off
Circulator pump
anti-seizing
Anti-seizing on(circulator pump
operates for 1 minute every 24 hours)
Comfort temperature set by the thermostat
Controlling the
Comfort temperature
Comfort temperature set on each
radiator or convector. In this option
the screen displays ConF