EasySync ES-R-2 01-M Series Скачать руководство пользователя

Страница: 17 / 23

Document Reference No.: ES_000011

ES-R-2x01-M RS232 to RS422 / RS485 Converter User Guide

Version draft

Clearance No.: ES#*

*****

Environmental Approvals & Declarations

7.1

EMI Compatibility

FCC and CE
The ES-R-2001-M and ES-R-2101-M have been tested to be compliant with both FCC Part 15 Subpart B

and European EMC Directive.

NOTE: This is a Class B product. In a domestic environment, this product may cause radio interference,

in which case the user may be required to take adequate measures.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•

Consult the dealer or an experienced radio/TV technician for help.

7.2

Safety

The ES-R-2001-M and ES-R-2101-M are defined as Limited Power Supply (LPS) devices, with operating

voltages under 60VDC.

7.3

Environmental

The ES-R-2001-M and ES-R-2101-M are lead-free devices that comply with the following environmental

directives: RoHS, WEEE, REACH, PFOS and DecaBDE.

7.4

Reliability

The ES-R-2001-M and ES-R-2101-M are designed as robust RS232 to RS422/RS485 adapters for use in

many environments. There are no user-serviceable parts. Any failure will require a replacement of the

unit.

Preliminary

Содержание ES-R-2 01-M Series
























Результаты поиска

Содержание ES-R-2 01-M Series

Отзывы:

Похожие инструкции для ES-R-2 01-M Series

Бренды по названию

Популярные бренды

EasySync ES-R-2 01-M Series, Руководство пользователя

Результаты поиска

Содержание ES-R-2 01-M Series

Отзывы:

Похожие инструкции для ES-R-2 01-M Series

Бренды по названию

Популярные бренды