19 . Place controler bracket onto the inside of the
hip pivot bracket as shown
20 . Insert 2 bolts and 2 nuts and tighten
securely.
21A . Remove one of the covers for the hip pivot
from the parts bag. Remove the 3 flat head
scews from the inside of the cover. Place cover
on the hip pivot. Make sure the EasyStand label
is not upside down.
21B . Replace the 3 flat head scews tighten
securely.
Repeat steps for the other cover.
Page 7
22 . Making sure casters are locked, with
assistance, position unit as shown. Remove
styrofoam from inside of the unit.
23 . Remove all 4 bolts and lock washers from the
front wheel assembly.
24 . With the openings on the bottom of the
frame facing down, place the wheel
assembly into the seat assembly.
Page 8
21A
21B
