background image

Table of Contents

Introduction  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1

Safety Precautions   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  2

Assembly    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  3

Adjustment/Usage   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  12 

Parts Detail   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  18

Maintenance   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .19

Re-Use   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  19

Serious Incidents    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  19

Limited Warranty  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 20

Date Purchased                           Serial #

Serial number is located on the rear leg

•   Check the Zing at least weekly to ensure all nuts, bolts and adjustable parts are tightened securely, failure  

 

 

to do so may result in parts falling off which may cause a choking hazard for children.

•   Mechanisms work better when clean and free of dirt, dust, lint and other debris. When not in use store the unit in 
 

an area that will allow the unit to remain clean. A dry dusting cloth or disinfecting wipes may be used periodically  

 

or as necessary on metal, plastic, and other non-upholstered surfaces. For upholstered surfaces, see Cleaning/

 

Disinfecting below.

Cleaning/Disinfecting 

•   Clean the Zing with a mild, non-abrasive disinfectant or soap and water.
•  Do not use bleach or any other bleach-based cleaners on the Zing. 
•  Disinfecting wipes are safe to use on metal and non-porous surfaces. 
•  Use a damp sponge with mild soap or a mild, non-abrasive disinfectant.   
•  Spot clean Neoprene with mild soap and water.  
•  Hygienic covers may be removed and hand washed with water. Air dry the covers. Always use care when  

 

 

removing and replacing the covers.  

•  Do not dry clean any upholstery items.
•  If the Zing is being used with one user, clean the Zing on a monthly basis or as needed.
•  If the Zing is being used in a multiple-user environment, the Zing should be cleaned after each use.

Urethane Coated Fabrics and Hygienic Washable Covers 

(Dartex or generic equivalent)

 

•  The recommended cleaning and disinfection instructions should be followed whenever possible to avoid damage to 
 

the PU membrane which could lead to premature failure of the cover.

•  For superficial dirt, use a disposable wipe and a warm solution of neutral detergent. Do not use abrasive cleaners. 
•  Disinfect using a 0.1% sodium hypochlorite solution (1000ppm chlorine), stronger bleach solutions not 
 recommended. 
•  Thoroughly rinse any remaining cleaning solution with water and dry fabric before re-use or storage.
•  Do not iron.

Maintenance

Re-Use

•  Before the product may be re-sold or re-used by another consumer the product shall be inspected, cleaned/disinfected 
 

by specialized medical equipment dealers. Any worn components or components that show signs of material 

 

degradation must be replaced. The medical equipment dealer will make the determination if the product is not suitable 

 

to be re-sold or re-used. Please note: the expected service life of a Zing is considered 5 years under normal use 

 

conditions. Note: This may vary based on frequency of use.

Serious Incidents 

•  If a serious incident were to occur in relation to your standing device please report this incident to Altimate Medical. If 
 

you are unable to report to Altimate Medical directly, you may report this to your medical equipment dealer who will then 

 

report the incident to Altimate Medical. Please also report the incident to the Competent Authority of the Member State 

 

in which you are located.  

Page 19

Содержание Altimate Medical Zing

























Отзывы: