easyRAID Q08QA-2GR2
Serial ATA II Disk Array System
13
2
B
a
s
ic
C
o
n
fi
g
u
ra
tio
n
–
M
o
u
n
tin
g
i
n
a
R
a
c
k
Mounting in a Rack
When the disk array system is completely set up, it can be installed in a standard 19-inch rack.
Follow the instructions in this section to install the disk array system in a rack.
1
Clip eight rack nuts supplied with your rack, into the rack, taking care that they corre-
spond with the mounting points on the rails.
2
Extend both of the rails so that they are the right length to fit in your rack.
3
Bolt the rails into the rack using the rack bolts supplied with your rack.
You will need four nuts and bolts (not included) for each rail; two at the front and two
at the back.
4
Tighten the locking screws when they are the correct length.
5
Slide the disk array system into the rack and bolt it into place with the supplied fixing
screws.
Caution
This product is heavy. Attempt to install the disk array system in a rack by
yourself could result injury or damage in the product.
