background image

800-448-3873 • Grant, Michigan

www.easypro.com

6836 • 9/19

Service and Maintenance

1. 

Disconnect the controller from the power supply before service.

2. 

All parts of the lighting system should be checked on a regular basis 

to make sure the system is functioning properly.

3.  All wires should be protected from possible damage from wildlife and other 

causes. Damaged wires due to neglect are not covered under warranty. 

4.  If light output is diminished check the face of the light fixture for debris and 

clean if necessary, or use remote control to increase brightness.

5.  If lights are not working, be sure the timer on the controller is set to operate 

lights when desired. See operations manual of timer/controller for more 

information.

EasyPro Pond Products Limited Warranty

EasyPro Pond Products (“EasyPro”) warrants to the purchaser that this product ("Product") will be free from any 

mechanical or material defects for a period of three years from the date of purchase. Removal of Quick Connect 

ends will void warranty. For use in fresh water only. This warranty only covers properly installed and maintained 

Products sold by authorized EasyPro Sellers who are subject to and follow EasyPro’s quality control standards. 

Please note that because EasyPro is unable to control the quality of Products sold by unauthorized sellers, unless 

otherwise prohibited by law, this warranty does not cover Products purchased from unauthorized sellers.
This warranty does not cover normal wear and tear, nor any deterioration suffered through overloading, improper 

use, negligence, improper installation, acts of God or accident. Similarly, any modification made by the purchaser 

to the Product will cause the warranty to be null and void. This warranty does not cover any cost associated with 

the installation or removal of the Product subject to a warranty claim.
All returned items will be inspected to determine cause of failure before a warranty claim is approved.

The exclusive remedies provided hereunder shall, upon EasyPro’s inspection and option, be either repair or 

replacement of the Product or parts covered under this warranty.
Making a Claim: A Return Authorization (“RA”) number must first be obtained by calling EasyPro at 800-448-3873 

or via email at [email protected]. It is the purchaser’s responsibility to pay the return shipping charges.

Be sure to include the RA number, original receipt (in the form of an invoice or sales receipt), your name, your 

return address and your phone number inside of the package. No warranty claims will be honored without the 

original receipt that shows that your purchase was made from an Authorized EasyPro Seller. Ensure the product is 

properly packaged and insured for the replacement value. Damage due to improper packaging is the responsibility 

of the sender.
ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING MERCHANTABILITY OF FITNESS FOR A 

PARTICULAR PURPOSE ARE HEAREBY LIMITED IN DURATION TO THE DURATION OF THE WARRANTY AS 

DESCRIBED ABOVE. Some States do not allow limitations on how long an implied warranty lasts, so the above 

limitations may not apply to you. 
EasyPro shall not be held liable for any damages caused by defective components or materials of this Product; or 

for loss incurred because of the interruption of service; or any consequential/incidental damages and expenses 

arising from the production, sale, use or misuse of this Product. Some States do not allow the exclusion or 

limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
EasyPro shall not be held liable for any loss of fish, plants or any other livestock as a result of any failure or defect 

of this Product. This warranty gives you specific legal rights, and you may also have other rights that vary from 

State to State.

Содержание RGB9PL

Страница 1: ...pond equipment 2 Lights must be attached to a matching 5 pin RGBW cords and RGBW 5 pin 24 volt DC controller 3 Never connect the lights directly to a 110 volt or higher outlet 4 Connect the RGBW controller transformer to a 110 volt receptacle that is protected by a Ground Fault Circuit Interrupter 5 Do not modify wiring in any way quick plug ends must stay intact to function and should not be repl...

Страница 2: ...ng 5 To connect pigtail wire from LED fixture to 5 pin corresponding power cable or splitter sold separately line up the pins from the fixture s pigtail to the receptacle of the cable or splitter Insert pins and secure with half turn twist nut on cable or splitter Always be sure o ring seals are present See figures 1 and 2 6 Connect power cables and or splitters to RGBC controller sold separately ...

Страница 3: ...ol White Cyan Cool White Warm White Orange 2 Change Red Green Blue Warm White 3 Change Red Green Blue 4 Change Warm White Blue Green Red 5 Change Red Green Blue Warm White several color cycles then accelerates to strobe 6 Change Red off Green off Blue off Yellow Green off Purple off Cyan off Warm White off 7 Change Yellow Green Purple Cyan 8 Change Red Yellow Green Warm White off 9 Change Warm Whi...

Страница 4: ...l of the Product subject to a warranty claim All returned items will be inspected to determine cause of failure before a warranty claim is approved The exclusive remedies provided hereunder shall upon EasyPro s inspection and option be either repair or replacement of the Product or parts covered under this warranty Making a Claim A Return Authorization RA number must first be obtained by calling E...

Отзывы: