Remote Control Operation
(remote control will come with controller)
To change settings and colors, use the
unit’s remote control. Controllers within the
remote's 1000' range will be synchronized.
• Desired setting must be achieved by clicking
remote functions of speed, mode, power
or main colors. Depress buttons slowly and
deliberately.
• Brightness settings only work with solid
colors.
• Changing the speed of a light cycle will reset
the mode to the beginning of its cycle.
• Remote requires an A23 battery (included)
• Remote control works only when red light
of the timer is on. This is during Manual or
Programed “On” functions.
Color Modes
1. (Default) Change — Red, Yellow/Green, Green,
Cyan, Blue, Cool White, Yellow, Cool White,
Purple, Cool White, Cyan, Cool White, Warm
White, Orange
2. Change — Red, Green, Blue, Warm White
3. Change — Red, Green, Blue
4. Change — Warm White, Blue, Green, Red
5. Change — Red, Green, Blue, Warm White
(several color cycles then accelerates to strobe)
6. Change — Red, off, Green, off, Blue, off, Yellow/
Green, off, Purple, off, Cyan, off, Warm White, off
7. Change — Yellow/Green, Purple, Cyan
8. Change — Red, Yellow/Green, Warm White, off
9. Change — Warm White, Yellow/Green, Red, off
10. Change — Red, Green, Blue, Yellow/Green,
Purple, Cyan, Warm White
11. Change – Demo Mode
12. Solid — Red
13. Solid — Green
14. Solid — Blue
15. Solid — Yellow/Green
16. Solid — Purple
17. Solid — Cyan
18. Solid — Warm White
S-/S+ Speed
B-/B+ Brightness
M-/M+ Color Mode
R Red G Green
B Blue W Warm White
Power
Reset Defaults
9. The LED light will default to mode 1 on initial startup. Use controller’s remote
to change settings and colors.
10. The longest length maximum length from controller to fixture should not
exceed 300’.