Installation
• Do not paint casing as overheating may occur
• Lift only by handle - not by power cable
• Do not hang water pump in water
• Install on a solid flat base in upright position
• Install proper outlet adapter for pipe or hose
• Discharge end of pipe or hose must be above water level
• Make sure that power cable plug and power outlet are away from water,
water discharge pipe or hose
Operation
• Turn off power supply or circuit breaker before connecting power cable plug
• Do not start operation with people standing near intake or outlet
• Do not operate when suspended in air
• Use pump only for circulation, transfer or removal of water or waste water
• Do not pump oil, salt water or chemical liquids
• This pump must stay submerged entirely when operating. If used in a skimmer, the
debris net must be kept clean to ensure adequate water flow to pump. Running
pump low on water will cause overheating and premature failure which is not cov-
ered under warranty.
Safety
• Use dedicated power outlet only
• Sharing the outlet with other equipment may cause over heating and fire
• Install in accordance with all applicable safety regulations
• Installation to be performed by qualified electrician
• Do not use without proper grounding or electrical shock may occur
Power Cord
• Do not use an extension cord
• Never submerge connecting power cable in water
• Do not tamper with the power cord
• Do not use adapter that is not grounded
• Make sure power cable does not become bent, twisted, abraded or cut
• Do not allow power cable to come in contact with heated surface
• Damaged cable may cause electric leakage, shock or fire
2
