EASYPRINT Compact CM, Пользовательская документация

Страница: 29 / 37

28 EPT033789 Issue 2 February 2018
1018 Head
Position
error Set the correct distance of 0.2-2.0mm between the print head
and substrate for both CM and IM printers. Adjust the print head
by selecting
Settings> Production Line Setup > Print Head >
Print Head Height.
1019 Calibration
required CAUTION :
When calibrating, the print head must be able to extend fully,
please ensure enough space is allowed to perform this function.
For CM printers:The print head position parameter must be set to
allow this.
For IM printers:
The printing surface should be moved from under the printer, if
not possible, remove the printer from the bracket.
CAUTION
Prior to installing the printer, calibration of the vertical print head
movement is required: Go to Settings > Production Line Setup >
Head Functions and select the Calibrate.
1019 error indicates that vertical print head movement requires
recalibrating - follow the path above.
Note that the print head must be able to extend fully in order to
successfully complete the calibration.
For CM printers:
The head position parameter must be set to allow this.
For IM printers:
The printing surface should be moved from under the printer.
If either of these scenarios is not possible, the printer will need to
be removed from the bracket to allow calibration to take place.
1026 Ribbon
Warning The remaining ribbon has reached the limit specified in the Error/
Warning screen . On the same screen the event is set to cause an
error.
Check the Error/Warning screen .
Check the remaining ribbon.