Easypix DV5008, Руководство пользователя

Страница: 7 / 33

7
English
2 Get Video Camera Ready
2.1 How to Turn ON/OFF the Power of Video Camera
2.1.1 Installing Battery
This video camera uses rechargeable lithium ion battery.
Please refer to following procedures for correct
installation of the battery:
1) Move the battery lock along direction to open the
card/battery cover.
2) Install the battery into the battery cell as directed and
ensure the battery lock is fastened after the battery is
inserted. Before installation, confirm the polarity is correct.
3) Slide and close the card/battery cover.
2.1.2 Turning ON/OFF Video Camera
1)
Turning ON: Press down the power button for 1~2 seconds and release it to start up the
system. If the system is not started normally, please check the battery power and polarity.
2) Turning OFF: Press down the power button for 1 second or longer to turn off the system
normally.
Note:
From LCD display, you can see the battery status as shown below:
Battery power is full and you can use the video camera normally.
Battery power is sufficient and you can use the video camera normally.
Battery power is half consumed. Please prepare for charging.
Battery is low power. Please charge it.
Battery power is completely consumed. The video camera will be turned off
automatically.
2.1.3 Charging Battery
1)
Place the battery contained video camera onto the USB cradle.
2) Connect the DC input line to ( DC IN 5.0V ) port on the USB cradle.
3) Connect the power line to the charging adaptor and power socket. The charging
indicator will become red and the charging is started.
4) Wait until the charging indicator turns into green, indicating that the battery is fully
charged. Usually, this process will take 3 hours around.
Note:
The bundled battery is 850 mAh, 3.7V. Please only use the bundled battery.