14
2. To activate the travel lock, press and hold the on/off button (4) for three seconds. When you
press the on/off button again, the display (5) shows a blinking lock symbol
and then the
product turns off.
3. To unlock and switch the product on, press and hold the on/off button for three seconds again.
The lock symbol
disappears from the display and the product starts operating.
IV- ADVICE FOR CARE & STORAGE
Clean
1
Remove the protective cap and remove any hair from the shaver with the
cleaning brush.
2
Press the release button to open the shaving head
,
Clean the collection
chambers with the brush.
3
Push the tab on the back of the shaver to flip the side trimmer up. Clean the
blade with the brush
4
After cleaning, close the side trimmer and the shaving head. Replace the
protective cap
It is recommended to carry out a complete cleaning every two months. Proceed as follows:
1
Press the release button to open the shaving head. Remove the holder by
turning the lock in the direction of the arrow on the holder.
2
Remove the shaving blades and guards from the shaving head.
3
Clean them using the cleaning brush, then rinse them under running water
4
Allow all parts to dry completely before placing them back on the shaving
head.
Close the shaving head, then replace the protective cap. When replacing the
guards (including the shaving blades) in the shaving head, make sure the
slots in the guards match to the channels of the shaving head.
