23
EN
Operation via the Control Panel
• Press
the button (
10
). The device switches on. The “
fi
replace look” lighting (
4
) and
the display (
2
) light up and the heating function starts automatically.
• To switch off the device, press the
button. The device switches to stand-by mode.
• The following settings can be made:
Time
1. Press the button (
14
) to access the settings for the time. The symbol for setting the
time
(
21
)
fl
ashes on the display.
2. Set the current day of the week (
18
) using the
+
button (
11
) and
–
button (
12
).
3. Con
fi
rm the entry with the button.
4. Set the current hour and minute in the same way.
Heating function
• The device has two heating levels. They are shown on the display via the symbol
(
16
) (
= heating level I,
= heating level II).
• Press
the button (
15
) to set the heating level you want or switch off the heating
function (sequence: Heating level I – Heating level II – Heating function off).
• The fan will continue to run for around 10 seconds once the heating function has
been switched off.
Lighting
• The
“
fi
replace look” lighting can be set to four brightness levels. They are shown on
the display via the symbol
(
20
).
• Press
the button (
13
) to set the brightness level you want (from bright to dark).
Operation via the Remote Control
• Press
the button (
24
). The device switches on. The “
fi
replace look” lighting (
4
) and
the display (
2
) light up and the heating function starts automatically.
• To switch off the device, press the
button. The device switches to stand-by mode.
• The following settings can be made:
Time
1. Press the
DAY
button (
31
) to access the day setting. The symbol for setting the time
(
21
)
fl
ashes on the display.
2. Set the current day of the week (
18
) using the
+
button (
24
) and
–
button (
26
).
3. Set the current hour in the same way using the
HOUR
button (
27
) and the current
minute using the
MIN
button (
28
).
These settings do not need to be con
fi
rmed. They are saved automatically as soon as
another setting is made or no setting is made for approx. 10 seconds.
Heating function
• The device has two heating levels. They are shown on the display via the symbol
(
16
) (
= heating level I,
= heating level II).
• Press
the button (
32
) to set the heating level you want or switch off the heating
function (sequence: Heating level I – Heating level II – Heating function off).
• Use
the
+
and
–
buttons to set the temperature as you wish (from 15 – 30°C).