PANTONE 072 C
PANTONE 123 C
Paper weight 60gsm
STEP 3
Attach crossbar (14) to top of uprights (2, 3) using the 4 crossbar
bolts (17) and nuts (25). Place The Driver (1) on top of crossbar.
Thread adjustment knob (35) through The Driver and center of
crossbar.
(TIP: To increase resistance of The Driver , firmly tighten knob.)
Safety Pin (6) When in use, place locking pin through upright and
into deck to stabilize unit. Remove pin to fold.
HOW TO INSTALL OR CHANGE BATTERIES:
1. Pull off the battery cover and place two AA batteries into battery housing
on back of monitor (refer) to illustration).
2. Ensure batteries are correctly positioned and battery springs are in
proper contact with batteries.
3. Replace battery cover and ensure it is tightly closed.
4. Battery life is approx. 1 year under normal usage.
5. If the display is non-readable or only partial segments appear,
remove batteries.
6. Removing the batteries will erase computer memory.
FUNCTION MARK:
A: Auto Scan
T: Elapsed Time
S: Current Speed
D: Trip Distance
C: Calorie Consumption
MODE OR FUNCTION
ACTION
Auto On/Off &
Without any signal for 8 minutes, the power will turn off
Auto Start/Stop
automatically. As long as the wheel is in motion or you
pressthe button, the monitor is in action.
Auto scan
Press “MODE” button until “▼”appears at SCAN position.
Monitor will rotate through all five functions (time, speed,
distance, calories, and total distance). Each display will
show for 4 seconds.
Elapsed Time
Press the button until the ARROW points to “T” to count
the elapsed time.
Speed
Press the button until the ARROW points to “S” to display
the current speed.
Trip Distance
Press the button until the ARROW points to “D” to
display the trip distance you have travelled.
Calories
Press the button until the ARROW points to “C” to display
the calorie consumption.
STEP 4
Attach the CONSOLE (46) onto the
CROSSBAR (14) PLATE using console
screws (47). Place electronic ox into center
of console. Thread wire through bottom.
Attach connector from electronic box to the
wire in the left upright.
STEP 5
Connect incline adjustment feet (56) to the
rear of the running deck by inserting threaded
bottom of foot and turning clockwise until
securely in place.
For incline adjustment, feet can be removed
or adjusted to the desired incline level.
(TIP: Increasing the deck angle reduces the
intensity of the exercise.)
Customer service: 0871 855 6100
For more innovative products from Easylife please visit:
www.easylifegroup.com
