EasyIOeu SH-SystemView9 Configuration
7
Ethernet/Date & time
To connect the tablet to some device by Ethernet you need to configure the Ethernet network.
Go to Settings->More…->Ethernet, enable Use Ethernet and if you connect directly to web server
device open Advanced Configure:
•
Disable DHCP;
•
Set the IP Address of your SystemView9;
•
Set the Mask Address of your network (normally 255.255.255.0);
•
Set the GateWay as the IP Address of your web server.
Don’t use/enable both networks at same time, Ethernet and Wi-Fi.
To have your tablet showing the graphics in the right time you need to make sure you have the date
and time updated.
Select time zone of your zone and if the tablet is not connected to internet disable Automatic date &
time, so Set date and Set time.
