background image

TERRIER SERIES SWING GATE OPENER USER MANUAL

1.1 GENERAL PRECAUTION:

1

WARNING : 

This user manual is only for qualified technicians who is specialized in installations and automations.

(1) All installations, electrical connections, adjustments and testing must be performed only after 
     reading and understanding of all instructions carefully. 
(2) Before carrying out any installation or maintenance operation, disconnect the electrical power 
      supply by turning off the magneto thermic switch connected upstream and apply the hazard area 
      notice required by applicable regulations
(3) Make sure the existing structure is up to standard in terms of strength and stability
(4) When necessary, connect the motorized gate to reliable earth system during electricity connection phase. 
(5) Installation requires qualified personnel with mechanical and electrical skills.
(6) Keep the automatic controls (remote, push bottom, key selectors…etc) being placed properly 
     and away from children.  
(7) For replace or repair of the motorized system, only original parts must be applied.  Any damage 
     caused by inadequate parts and methods will not be claimed to motor manufacturer.
(8) Never operate the drive if you have any suspect with what it might be faulty or damage to the system.
(9) The motors are exclusively designed for the gate opening and closing application, any other 
      usage is deemed inappropriate. The manufacture should not be liable for any damage resulting
      from the improper use. Improper usage should void all warranty, and the user accepts sole
      responsibility for any risks thereby may accrue.
(10) The system may only be operated in proper working order. Always follow the standard procedures 
        by following the instructions in this installation and operating manual.
(11) Only command the remote when you have a full view of the gate.

TMT AUTOMATION INC. shall not be liable for any injury, damage, or any claim to any person 
or property which may result from improper use or installation of this system.

Please keep this installation manual for future reference.

Содержание TERRIER Series









Отзывы: