6
Fixing the Cubicle
Step 2: Pre-Assemble the Single Clamps
•
For the single-sided clamp, interlock the teeth and feed
the M10x110mm Bolt through the hole as shown.
•
Do not tighten the bolt fully, only lightly to keep the
sub-assembly together.
Parts List
Item ID
Part Name
Qty.
2
Clamp (matching halves)
1
B
M10x100mm Bolt
1
C
M10 Locknut
1
.
Step 2.1: Pre-Assemble the Double Clamps
•
For the double-sided clamp, push the M12 bolts through
both clamps and secure with a nut.
•
Do not tighten the bolts fully, only lightly to keep the
sub-assembly together.
Parts List
Item ID
Part Name
Qty.
2
Clamp (matching halves)
1
M
M12x40mm Bolt
4
I
Locknut M12
4
.
Step 3: Slide on the Clamps
•
Slide the pre-assembled clamps over the post.
•
If angled clamps are used in your cubicle (Calm model
only), lower the angled clamp first as shown in
Appendix A/B.
•
When the clamp is in place, the bolt can be slightly
tightened to hold it in place. DO NOT OVERTIGHTEN,
as further adjustment may be required.
