9
Positioning & Fixing the Cubicle
Positioning
Refer to Appendix A for single cubicle assembly positioning
guidelines.
•
The scratcher should sit in the middle of the cubicle. Use a measuring tape to find the
centre of the bed and centre the scratcher along it. Ensure the short spikes of the
scratcher face the bed to provide optimal positioning and use for the animal.
•
A key measurement is the distance from the neckrail to the heelstone, as can be seen
in Appendix A and Appendix B. This measurement should
sit between 2058mm (6’9’’)
and 2108mm (6’11’’).
Fixing
•
The Fixing ID identifies which bag the fixing belongs to in accordance with the bag
identifier on the bag labels. It is advised to use the fixing for the application from the
Fixing ID
given in the instructions. These I ’s are
:
•
Detailed descriptions of the following fixings can be found on the next page. Please
pay close attention to each Fixing ID and to the relative quantity required.
