AFTER SALES SUPPORT
Safety
9
USA
1 877-386-8264
www.monolith-support.com
Laminator
USA
− If the power cable of the laminator is damaged, the manu-
facturer, its customer service team or a person with similar
qualifications must replace it.
− Do not open the housing; instead, have a qualified profes-
sional perform repairs. To do so, contact the service
address indicated on the warranty card. Liability and war-
ranty claims are waived in the event of repairs or conver-
sions performed by the user, improper connection of the
device or incorrect operation.
− Only parts that comply with the original device data may
be used for repairs. Electrical and mechanical parts, which
are essential for providing protection against sources of
danger, are located in this laminator.
− Do not operate the laminator with an external timer or
separate telecontrol system.
− Do not immerse the laminator or the power cable or pow-
er plug in water or other liquids.
− Never touch the power plug with damp hands.
− Do not perform any other work (such as cleaning) on the
laminator while it is operating.
− Never pull the power plug out of the socket by the power
cable; instead, always do so by taking hold of the power
plug.
− Never use the power cable as a carrying strap.
− Keep the laminator, power plug and power cable away
from open flames and hot surfaces.
− Lay the power cable so that it does not pose a tripping
hazard.
− Do not kink the power cable and do not lay it over sharp
edges.
− Only use the laminator in indoor areas. Do not use it in wet
rooms or in the rain.
− Never store the laminator so that it is at risk of falling into a
bath tub or washbasin.
Содержание OL 250-Q125
Страница 4: ...4 A Ready O N O FF 2 1 3 5 6 4 USA...
Страница 5: ...5 ON OFF ABS 7 4 C B USA...
Страница 18: ...USA AFTER SALES SUPPORT 18 USA 1 877 386 8264 www monolith support com Laminator...