AFTER SALES SUPPORT
1 888 367 7373
09-24-14 / FJ142L-120-500
How to Clean the Dust Container
1.
Remove the dust chamber and HEPA filter from the dust container.
2.
The dust container can be rinsed with warm soapy water and dried with a soft cloth.
NOTE: Please make sure that the dust chamber has dried completely before next use.
How to Clean the Vacuum Head
1.
Turn the vacuum head over so the bottom is facing up. Locate the two tabs on either
side of the air wheel cover. Squeeze the tabs and remove the air wheel cover.
2.
Remove any debris that has gathered around the vacuum head brush. String, hair, or
fabric will obstruct brush movement.
How to Clean the Hose
1.
To remove the hose, press the hose release tabs and pull it out of the vacuum canister.
2.
Clear away any debris or obstruction from hose. Do not use sharp objects to clean out
the hose as they may cause damage.
How to Clear Clogs
Low suction or poor pick up may be due to a clog in the vacuum canister. If you notice a
change in the sound of the motor or a reduction in performance, check for clogs.
CAUTION: Always be sure that the Stick Vacuum is switched OFF and unplugged before
attempting to remove a clog.
1.
Empty dust container.
2.
Check dust container for buildup.
3.
Check for clog in vacuum head.
4.
Check floor tool
Storing
Store the Vacuum in a dry location. Do not place any heavy items on top of Vacuum
during storage as this may result in possible damage of the Vacuum.
Caution:
Any electronic or electrical appliance should not be stored in or exposed to
areas of high heat or humidity. Do not store your Upright Vacuum close to stoves,
radiators, furnaces or in a bathroom or bathing area.
10
