AFTER SALES SUPPORT
USA
877-386-8264
23
Cleaning and maintenance
USA
3. Hold the shaver over the sink.
4. Depress both release buttons
4
to release the
shaver head
2
(see
fig. D
).
5. Pull the shaver head up and off.
6. Knock the shaver head out gently over a sink to
remove stubbles.
7. Without the shaver head mounted, use the On/Off
switch to switch the shaver on for approx.
5–10 seconds to dispel any stubble from the shaver
blades
3
.
8. Firmly mount the shaver head on the shaver until the
locking mechanism audibly engages (see
fig. E
).
9. Place the protective cap
1
on the shaver.
The shaver is now ready for use again.
Daily cleaning after a wet shave
1. Use the On/Off switch
5
to turn off the shaver.
2. Before cleaning, pull the 5 V plug
8
out of the
shaver.
3. Hold the shaver over the sink.
4. Depress both release buttons
4
to release the
shaver head
2
(see
fig. D
).
5. Pull the shaver head up and off.
6. Wash the shaver head thoroughly under warm
running water on the inside and outside (see
fig. F
).