EASYair EME5 Series, Инструкция по установке, использованию и техническому обслуживанию

Страница: 16 / 52

16
by this system and must cut-off
whenever the suction flow rate
drops below the values prescribed�
When the appliance is installed
under the extraction hood, check
that the following indications are
respected:
a) the volume extracted must
be higher than that of the flue
gases generated (see current
regulation);
b) the material with which the hood filter is made must resist the
temperature of the flue gases which, on exiting the conveyor, can reach
300° C;
c) the end part of the appliance evacuation pipe must be positioned
inside the base perimeter projection of the hood;
d) the gas supply must be restored manually following a block
caused by insufficient suction.
1.8 Gas oven operating values (for gas versions only)
Fig. 10
Model EMG5, EMG52, ECG52 EMG7, EMG72, ECG72 EMG10, EMG102, ECG102
Voltage 1N 230V 1N 230V 1N 230V
Frequency (Hz) 50/60 50/60 50/60
Absorbed power (kW) 0�3 0�6 0�6
Nom� heat input (kW) 9�5 16 19
Section power cable
(mm
2
) 3 x 1�5
3 x 1�5 3 x 1�5
Nominal heat input