EASYair ECE10 Series, Инструкция по установке, использованию и техническому обслуживанию

Страница: 11 / 52

11
the pipe from metal residues�
Connect the "Water" pipeline to water mains and install a shut-off valve
and a filter on the pipe.
Ensure that the shut-off valve is positioned so that it can be easily
operated by the operator at any time�
Attention : if the water supply pipe malfunctions, it should be replaced
with a new one while the old broken one should not be used again�
1.4 Connection to the drain
The oven is equipped with a
water drain; this device is placed
at the bottom of the rear part of
the appliance and has a tube with
diameter of 32 mm�
Connect the pipe that projects
from the drainage device ( Fig. 4,
ref. A )� It is, however, advisable
to connect the pipe to an open
funnel�
1.5 Electric connection
As prescribed, the electrical system must have an efficient earth
system, as required by the regulations in force� The electrical safety of
the appliance can only be ensured when the electrical system is conform�
Before making the electrical connection, check the mains voltage and
frequency values to ensure that they conform to the requirements of the
appliance, as indicated on its information plate ( Fig. 5 )�
For direct connection to the mains, a device, sized according to the
load, must be placed between the
appliance and the mains itself, which
ensures disconnection� Its contacts
should have a minimum opening
distance that enables complete
disconnection under the conditions
of category III overvoltage,
according to installation rules; this
Fig. 4
A
Fig. 5
POWER SUPPLY
TOT. POWER kW
MOD NR
3N 400V AC 50 HZ
ETE5 000000/01/16
6,3 IP