Easy wave RCU08, Руководство пользователя, Страница: 6 / 8

6
C3 Deleting transmitters/buttons
In delete mode, individual transmitters/buttons
can be deleted from the memory of an output.
External buttons can be "deleted" in the same
way.
If an external button is "deleted" from all outputs,
it works again in the ON/OFF operating mode ( )
1-button operation in the factory-set output.
Complete deactivation of the button inputs is not
possible.
Operation
1)
[Press button]
Indication Note

P
P
1x briefly or
2x briefly
LED 2TB flashes
LED 1TB flashes
Programming mode started.
 M repeatedly Select delete function L.
 CH1/CH2 LED CH1/CH2 and
LED xTB flash
Select output.
Only one output can be selected. Output can
be changed as often as required.

P
> 1.6 s LED 2TB
+ 1TB flash quickly
Delete mode started.
Cancel 1x P <1.6 s

Transmitter
button Tx or
button
1x briefly
LED 2TB
+ 1TB light up
Transmitter/button deleted from the selected
output.
When all the LEDs turn off, the receiver is
ready for operation.
1) If no buttons are pressed within 30 seconds, the RCU08 automatically switches back to operating mode.
The settings are not saved.
C4 Output reset
A separate reset can be performed for each out-
put.
All programmed transmitters/buttons are deleted
and all switching times for the respective output
are reset.
The external button input belonging to the output
is assigned to the relevant output again:
Output 1 (CH1): EXT1 button
→
1TB, ON/OFF
Output 2 (CH2): EXT2 button
→
1TB, ON/OFF
Operation
1)
[Press button]
Indication Note

P
P
1x briefly or
2x briefly
LED 2TB flashes
LED 1TB flashes
Programming mode started.

M repeatedly
Select delete function L.

CH1/CH2
LED CH1/CH2 and
LED xTB flash
Select output.
Only one output can be selected.
Output can be changed as often as required.

P > 1.6 s
LED 2TB
+ 1TB flash quickly
Delete mode started
Cancel 1x P <1.6 s

P > 1.6 s
LED 2TB
+ 1TB light up
All transmitters/buttons from the selected
output deleted and TIMER reset.
When all the LEDs turn off, the receiver is
ready for operation.
1) If no buttons are pressed within 30 seconds, the RCU08 automatically switches back to operating mode.
The settings are not saved.
C Programming
If a transmitter/button is programmed in several outputs, it may have to be deleted from each
output individually.
If an attempt is made to delete a transmitter/button that is not programmed in the selected
output, the LEDs flash quickly and the receiver remains in delete mode.
1TB
P M CH1 CH2
2TB
PWR
P M CH1/CH2
<
1,6 s
Tx
<
1,6 s
P
>
1,6 s
5
1TB
P M CH1 CH2
2TB
PWR
P M CH1/CH2
<
1,6 s
P
>
1,6 s
P
>
1,6 s