UM500021_1023 EN
In order to be able to use bidirectional functionalities, a server (e.g. APC01) can be programmed into
the RCJ34. The available functions are automatically detected, so no specific operation type needs to
be selected when programming a server.
Program the server into the receiver according to the instructions in the respective server application by
adding an ELDAT actuator as an „Easywave neo“ device. After it is programmed, the server receives
feedback about each switching operation performed, even if this is triggered by another transmitter or
manually via the external button inputs on the RCJ34. The current state of the receiver is therefore
always displayed in the associated application.
BI-DIRECTIONAL FUNCTIONS (Easywave neo)
Disposal
Waste electrical products should not be
disposed of with household waste!
Dispose of the waste product via a
collection point for electronic scrap or
via your specialist dealer.
Put the packaging material into the
recycling bins for cardboard, paper
and plastics.
Warranty
We will remedy defects on the device based on
material or production errors or exchange the de-
vice within the statutory warranty period.
Any unauthorized tampering with, or modifica
-
tions to, the product shall render this warranty
null and void.
Conformity
Hereby, ELDAT EaS GmbH declares that the ra
-
dio equipment type RCJ34 is in compliance with
Directive 2014/53/EU. The full text of the EU de
-
claration of conformity is available at the following
internet address: www.eldat.de
Customer Service
If the device does not work properly despite pro
-
per handling or in case of damage, please contact
the manufacturer or your retailer.
ELDAT EaS GmbH
Schmiedestraße 2
15745 Wildau
Germany
Phone: + 49 (0) 33 75 / 90 37-310
Fax:
+ 49 (0) 33 75 / 90 37-90
Internet: www.eldat.de
E-mail: [email protected]
GENERAL INFORMATION
P
Start programming
process in the server
application
Put the receiver in programming mode
Finish the programming
process in the appli-
cation
Program server
Add an actuator in the Easywave app as an Easywave neo device and follow the instructions in the
app. Only one server can be programmed into the receiver. Any server that may have already been
programmed will be overwritten.
Delete server
A server can be removed from the RCJ33 by deleting the relevant device in the server application. To
delete the server, the receiver must be powered and within range of the server. As an alternative to
deleting it via the app, the server can also be deleted by resetting the receiver.
Delete the receiver or relevant Easywave neo actuator in the server application, while the recei
-
ver is powered and within range of the server.
Operation
(1)
[Press button]
Indication
Note
Start the programming process via the server application.
P
1x briefly
LED P flashes red
Receiver in programming mode
any operating mode possible
Complete the programming process via the application.
Once a server is programmed to the RCJ33, an acknowledgement for each switching opera-
tion is transmitted via radio. If the server is not in use, delete it from the receiver to prevent
unnecessary radio transmissions.
