3
PROGRAMMING
Tx
P
Deleting transmitters
In delete mode, individual transmitters or external buttons can be specifically deleted from the memory
of the RCJ34. The delete mode is activated separately for each output. If a transmitter is programmed
into both outputs, it can only be deleted from both outputs one after the other.
If an external button is deleted from all outputs, the button input then works again in the factory opera
-
ting mode ON/OFF 1-TB of its associated output.
If the LED flashes quickly for two seconds during deletion, the transmitter in question was not program
-
med into the selected output. The receiver remains in delete mode.
Operation
(1)
[Press button]
Indication
Note
P
1x long
LED P flashes quickly red
Receiver in delete mode for output 1.
Tx
1x briefly
LED P lights up
2 seconds red
Transmitter has been deleted.
Reset
Doing a RESET, the receiver will be set back to the factory settings. All programmed transmitters are
deleted and the button inputs are reset to the factory operating mode. The reset is always carried out
for both outputs.
Operation
(1)
[Press button]
Indication
Note
P
1x long
LED P flashes quickly red
Receiver in delete mode.
P
1x long
LED P
lights up
4 seconds red
All transmission codes have been deleted and
the factory settings have been restored.
P
P
> 2 s
> 2 s
> 2 s
Output 1
Output 2
Operation
(1)
[Press button]
Indication
Note
P
P
1x long
1x
briefly
LED P flashes quickly green
Receiver in delete mode for output 2.
Tx
1x briefly
LED P lights up
2 seconds green
Transmitter has been deleted.
Tx
P
P
> 2 s
P
< 2 s
