TOOL MAINTENANCE
• Provide several drops of oil to pivot points periodically to prevent binding.
• Keep all areas of the tool clean particularly those surfaces that contact Sheet metal work pieces. Dirt and metal chips can cause uneven clamping
and inaccurate bends.
• Store in a clean & dry environment when not in use. Coat all machined surfaces with a light lubricant fi lm of oil or suitable protectant to
prevent rust formation.
ACCESSORIES
#28038 Sheet Metal Gauge
#13475 Electric Metal Cutting Shears
#28187 Bead Roller Kit
#51088 Shrinker/Stretcher Set
#20257 5
PC
Sheet Metal Layout Kit
#20258 Protractor
#20259 Ruler
VERSA-BEND 20" OFFSET
SHEET METAL BRAKE
INSTRUCTIONS
Item #14042
© Copyright 2014 Easthill Group, Inc.
Instruction #14042Q Rev. 11/14
If you have any questions about the use of this product, please contact
The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: [email protected]
PDF version of this manual is available online >> eastwood.com/14042manual
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA
US and Canada: 800.345.1178 Outside US: 610.718.8335
Fax: 610.323.6268 eastwood.com
