Eastwood Elite Concours CC500 Скачать руководство пользователя страница 6

6

 

Eastwood Technical Assistance: 800.343.9353  >>  [email protected]

GUN SETTINGS

• 

Air Cap

: Make sure 

the Air Cap is properly 
oriented in a horizontal 
plane to produce a verti-
cal fan spray pattern by 
viewing the HVLP Paint 
Gun from the front. To 
adjust, loosen Retaining 
Ring by rotating counter-
clockwise slightly, adjust 
Air Cap then re-tighten 
Retaining Ring 

(FIG 3)

.

• 

Fluid Control: 

The Fluid 

Control knob (located at 
mid-rear of gun body) 
regulates the distance the 
Needle travels and the 
amount of paint flowing 
through the gun.

  

NOTE:

 Generally, for higher viscosity coatings, a wider opening is desired. A more closed open-

ing is better suited for lower viscosity fluids. To adjust, rotate the Fluid Control Knob outward 
(counter-clockwise as viewed from the rear) to increase flow and turn inward to reduce flow 

(FIG 3)

.

• 

Fan Control:

 The Fan Control knob (located at the upper-rear of the paint gun body) controls 

the size and shape of the spray pattern or “fan”. Rotating the knob counter-clockwise (as 
viewed from the rear of the gun) will produce a larger and softer spray pattern while rotating it 
clockwise will result in a smaller, sharper, round pattern. For most painting conditions, a larger, 
softer fan is desired 

(FIG 3)

.

• 

Air Control:

 The Air Control knob (located at the bottom of the 

gun handle adjacent to the air inlet) is opened by rotating in a 
counter-clockwise direction (as viewed from the bottom of the 
gun). This is for “fine tuning” the airflow to the gun. You will 
generally want to set the inlet pressure at the regulator. Start 
with the Air Control in the fully open position and decrease air 
as needed 

(FIG 3)

.

•  With practice, you will quickly acquire a “feel” for the gun and 

will be producing professional results.

•  After achieving optimal knob settings, note their positions with 

the numbered indicators on the face of the knobs. This will 
assist in quickly “tuning” the gun in future uses 

(FIG 4)

.

FIG. 4

FIG. 3

Air Cap

Air Control

Fluid 

Control

Fan 

Control

Содержание Elite Concours CC500













Отзывы: