2
Eastwood Technical Assistance: 800.544.5118 >> [email protected]
STATEMENT OF LIMITED WARRANTY
The Eastwood Company (hereinafter “Eastwood”) warrants to the end user (purchaser) of all new welding and cutting equipment (collectively called the “products”) that it will
be free of defects in workmanship and material. This warranty is void if the equipment has been subjected to improper installation, improper care or abnormal operations.
WARRANTY PERIOD:
All warranty periods begin on the date of purchase from Eastwood. Warranty Periods are listed below, along with the products covered during those warranty periods:
3 Year Warranty on Material, Workmanship, and Defects:
• Eastwood ARC200i Welder
Items not covered under this warranty: Collets, Collet Bodies, electrodes, nozzles, and ground clamp and cable.
All other components are covered by the warranty and will be repaired or replaced at the discretion of Eastwood.
2 Years:
• All Welding Helmets.
CONDITIONS OF WARRANTY TO OBTAIN WARRANTY COVERAGE:
Purchaser must first contact Eastwood at 1-800-345-1178 for an RMA# before Eastwood will accept any welder returns.
Final determination of warranty on welding and cutting equipment will be made by Eastwood.
WARRANTY REPAIR:
If Eastwood confirms the existence of a defect covered under this warranty plan, Eastwood will determine whether repair or replacement is the most suitable option
to rectify the defect. At Eastwood’s request, the purchaser must return, to Eastwood, any products claimed defective under Eastwood’s warranty.
FREIGHT COSTS:
The purchaser is responsible for shipment to and from Eastwood.
WARRANTY LIMITATIONS:
EASTWOOD WILL NOT ACCEPT RESPONSIBILITY OR LIABILITY FOR REPAIRS UNLESS MADE BY EASTWOOD. EASTWOOD’S LIABILITY UNDER THIS WARRANTY SHALL NOT
EXCEED THE COST OF CORRECTING THE DEFECT OF THE EASTWOOD PRODUCT. EASTWOOD WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
(SUCH AS LOSS OF BUSINESS, ETC.) CAUSED BY THE DEFECT OR THE TIME INVOLVED TO CORRECT THE DEFECT. THIS WRITTEN WARRANTY IS THE ONLY EXPRESS
WARRANTY PROVIDED BY EASTWOOD WITH RESPECT TO ITS PRODUCTS. WARRANTIES IMPLIED BY LAW SUCH AS THE WARRANTY OF MERCHANTABILITY ARE LIMITED
TO THE DURATION OF THIS LIMITED WARRANTY FOR THE EQUIPMENT INVOLVED. THIS WARRANTY GIVES THE PURCHASER SPECIFIC LEGAL RIGHTS.
THE PURCHASER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
SPECIFICATIONS
The
EASTWOOD ARC200I WELDER
provides a convenient method of performing “stick” welding carbon steel or stainless steel. Inverter Technology provides the
capability of welding thin or heavy gauge steel with precision and ease. When adding the optional Arc Welder TIG Torch, Gas Regulator, and a cylinder of shielding
gas, the ARC200i becomes a TIG welder.
Output
Amperage
Range
Maximum
Input
Amperage
Input
Voltage
Rated
Duty Cycle
Rod
Diameter
Rod
Material
Weight
Overall
Dimensions
20-200 Amps DC
37.2 Amps
220-240 VAC,
50/60Hz
15% @
200 Amps
1/16”
to 3/16”
E6013,
E7014,
E7018,
Stainless Steel
11.9 lbs.
[5.4kg]
10.25" [360mm]
x 10.625" [270mm]
x 6" [150mm]
DUTY CYCLE
The rated Duty cycle refers to the amount of welding that can be done within an amount of time. The Eastwood ARC200i has a duty cycle of 15% at 200 Amps. It
is easiest to look at your welding time in blocks of 10 Minutes and the Duty Cycle being a percentage of that 10 Minutes. If welding at 200 Amps with a 15% Duty
Cycle, within a 10 Minute block of time you can weld for 1-1/2 Minutes with 8-1/2 Minutes of cooling for the welder.
If the Duty Cycle is exceeded, the Welder will automatically shut off, however the fan will continue running to cool the overheated components. When a safe tempera-
ture has been reached, the Welder will automatically switch the welder output back on. To increase the duty cycle you can turn down the Amperage Output control.
