Eastwood 54830, Инструкция по эксплуатации

Страница: 4 / 8

4
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
FIG. 1 FIG. 1
FIG. 2 FIG. 2
FIG. 3 FIG. 3
FIG. 4 FIG. 4
SET UP
• Before beginning assembly, clamp the lower edge of the Mini English Wheel
Frame just below the frame screw heads (FIG 1) , in a securely mounted,
minimum 4” (6” & larger strongly recommended) vise (not included).
For a quick how-to video on assembly and use, visit Eastwood.com and search
#54830, then click the Set-up video link!
DO NOT clamp over the frame screw heads as it may cause
damage and cause the frame to be unstable in the vise.
It is helpful to use a vise with a swiveling base, allowing
rotation as needed to maintain a comfortable position while
working a panel.
ASSEMBLY
• Apply several drops of motor oil to the Anvil and Upper Wheel Axles [F] & [J]
for lubrication (FIG 2) .
• Slip the Anvil Axle [J] into a selected Anvil [K, L, M OR N] and insert it with
the shaft flats keyed into the slots of the Anvil Yoke [D] (FIG 3) .
• Install one Snap Ring
[G]
into a groove on the Upper Wheel Axle
[F]
.
• Carefully hold the Wheel
[H]
in place with the bore aligned with the holes in
the Wheel Yoke
[B]
and slide the Wheel Axle
[F]
through
(FIG 4)
.
• Install the remaining Snap Ring [G] on the other side to retain the Upper Wheel
Axle [F] securely (FIG 5) .
• Apply a good quality, medium bodied chassis grease to the Jackscrew threads.
• Thread the Jackscrew
[P]
into the bottom of the Frame until it begins to engage
the bottom of the Anvil Yoke
[D] (FIG 6)
.
FIG. 5 FIG. 5