background image

To order parts and supplies: 800.343.9353  >>  eastwood.com 

3

 

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

 

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

 

CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided, 
could result in minor or moderate injury.

 

NOTICE is used to address practices not related to personal injury.

GENERAL SAFETY RULES

Read all instructions. Failure to follow all instructions listed below may result in electric shock,  
fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your 
mains-operated (corded) power tool or battery-operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

1)  WORK AREA SAFETY

a)

  Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b)

  Do not operate power tools in explosive atmospheres, such as in the presence of flammable 

liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c)

  Keep children and bystanders away while operating a power tool. Distractions can cause you  

to lose control.

SAFETY INFORMATION

Содержание 32489

















Отзывы: