2
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
To order parts and supplies: 800.343.9353 >> eastwood.com
7
The
EASTWOOD 3" INLINE CUT-OFF TOOL
features a unique design configuration which provides
additional versatility and comfort compared to ordinary pneumatic Cut-Off tools. A heavy, die-cast
wheel guard is included for maximum safety, as well as a ball bearing motor for smooth operation and
long life. Speed is easily controlled with an infinitely progressive throttled trigger control and a speed
control lever.
.
CONTENTS
(1)
3" Cut-Off Tool
(1)
14mm Flat Arbor Wrench
(1)
5mm Hex Key Arbor Screw Wrench
(1)
3mm Hex Key Guard Wrench
(1)
1/4" MNPT, Male quick-disconnect
Inlet Fitting with Thread Sealant
SPECIFICATIONS
Arbor Size:
3/8" (9.5mm)
Replacement Cut-Off Wheel Size:
3/8" (9.5mm) x 3" with a min. 20,000 RPM rating
Maximum cutting depth:
11/16" (17.5mm)
RPM:
17,000 free speed
Air Consumption:
4 cfm (113 L/minute)
Inlet thread size:
1/4" FNPT
PROBLEM
CAUSE
CORRECTION
Tool Doesn’t
Respond
to Trigger
Depression
Insufficient volume
of air (CFM) to
operate tool
Verify sufficient air supply to tool.
(4 CFM @ 90 PSI minimum requirement).
Moisture or other
contamination in
air supply
Check for moisture in air line and tool air inlet.
Tool
Performance
is Slow or
Sluggish
Insufficient volume
of air (CFM) to
operate tool
Verify sufficient air supply to tool.
(4 CFM @ 90 PSI minimum requirement).
Moisture or other
contamination in
air supply
Check for moisture in air line and tool air inlet.
Air Motor is lacking
lubrication
Stop use immediately and add air tool oil directly to
air inlet.
Tool Vibrates
Excessively
During Use
Out of balance
condition from
damaged Cutting
Wheel
Stop use immediately, check for and replace
cracked or broken Cutting Wheel.
Loose Wheel
Retaining Screw
Tighten loose Socket Head Wheel Retaining Screw.
TROUBLESHOOTING
