4
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
BURSTING HAZARD!
• Do not exceed 90 psi (6.3 bar) of tool inlet pressure. Permanent tool
damage and/or explosion could occur and cause personal injury.
INJURY HAZARD!
• This tool uses high-speed, highly abrasive surfaces which can quickly cause
severe injury. Keep fingers and hands away from moving parts when operat-
ing. Wear thick, well-fitting work gloves and keep loose clothing, sleeves,
cords, jewelry and hair away from moving parts.
• This tool can eject sparks at high speed which can ignite flammable
materials or injure others nearby. Do not operate near flammable
materials and keep all persons and pets away from the work area.
• Do not force tool or exert excessive side forces on tool while in use as the
tool body can suddenly kick back or twist causing severe hand or wrist
injury. Backing Pads and Abrasive Discs disintegrate with excessive side
force causing them to disintegrate and eject sharp pieces at high velocity.
• Always make sure the workpiece is securely clamped or anchored to avoid
sudden movements which could result in injury.
• Always disconnect tool from air supply when changing Backing Pad or
Sanding Disc to prevent accidental tool starting and potential severe injury.
• Frequently inspect Backing Pad and tool condition. If cracks develop,
discontinue tool use immediately and replace damaged pad. ONLY USE
replacement Backing Pads rated for 2,000 RPM or greater use otherwise
severe injury or death can result in the event of Pad failure.
VIBRATION INJURY HAZARD!
• This tool will vibrate during use! Repeated exposure to vibration may cause
physical injury.
