background image

To order parts and supplies: 800.343.9353  >>  eastwood.com 

3

 

 READ INSTRUCTIONS 

•  Thoroughly read and understand these product instructions before using this 

equipment. Failure to follow all warnings can result in tool damage or serious 
physical injury.

•  Keep these product instructions for future reference.

 

•  This device is specifically designed to be used for compressed air ONLY. 

Use with any other fluid (liquid or gas) is a misapplication and not permitted. 
Use with certain hazardous liquids or gasses could be harmful to the unit or 
result in a combustible condition or hazardous external leakage. 

 

EYE INJURY HAZARD!

•  Always wear ANSI Z87-approved eye protection when operating this Air  

Filter/Regulator. Air, moisture and debris can be ejected at high velocity 
while using this equipment.

 

HEALTH HAZARD!

•  Air discharged from this Air Filter/Regulator is not intended for, and should 

never be used as supply air for human consumption.

 

EXPLOSION HAZARD!

•  Do not exceed 150 PSI (10.3 bar) of inlet air pressure. Permanent equipment 

damage and/or bursting could occur and cause personal injury.

 

INJURY HAZARD!

•  This Air Filter/Regulator can quickly release moisture and other debris while 

connected to an air supply causing serious personal injury. Always shut off 
the air supply to the Air Filter/Regulator and depressurize before draining 
moisture, changing desiccant or other maintenance.

SAFETY INFORMATION

Содержание 31633













Отзывы: