Eastwood 31539, Инструкция по эксплуатации

Страница: 7 / 12

To order parts and supplies: 800.343.9353 >> eastwood.com
7
FIG. 6
FIG. 7
ADD CORNER BLOCKS [G], JACKING SPINNERS [H]
AND SUPPORT PADS [J] TO FRAME ASSEMBLY
• Drop a Corner Block
[G]
into each of the open square
tubing receptacles of the Corner Assemblies
[A]
&
[B]
. Note that the ends of the Corner Blocks with
the round bores must be installed in the UP position
while the through holes in the sides must go in
DOWN and be aligned with the through holes in the
square tubing receptacles
(FIG 6)
.
• Thread the four Acme Threaded Jacking Spinners
[H] onto the four Acme Threaded stubs of the Sup-
port Pads [J] (FIG 7) .
• Set the Acme Threaded post of each of the four Sup-
port Pads and Jacking Spinner assemblies [J] & [H]
into each of the Corner Blocks [G] (FIG 8) .
• Thread four Knob Bolts
[P]
into the threaded bosses
on open square tubing receptacles of the Corner As-
semblies
[A]
&
[B]
. Do not tighten
(FIG 8)
.
FIG. 8
G
✓
✓
UP
J
✓
H
✓
P
✓