4
Eastwood Technical Assistance: 800.544.5118 >> [email protected]
SETTING THE TORQUE VALUE
• Unlock by turning the black
Knurled Knob at the end of the
Torque Wrench Handle approx.
1/4 turn
(FIG. 1)
in a Counter-
Clockwise direction.
• To select the desired torque, turn
the Rotating Handle Sleeve until
the “0” aligns with a major gradu-
ation on the stationary segment of
the Handle
(FIG 2)
, then continue
turning the Handle Sleeve until the
desired minor graduation on it is
aligned with the stationary handle
segment center line
(FIG 3)
.
• Lock the torque setting by turning
the black Knurled Knob at the end
of the Torque Wrench Handle
(FIG. 1)
in a Clockwise direction
until it stops.
• The Torque Wrench is now ready
for use.
FIG. 1
FIG. 2
FIG. 3
Do not excessively loosen the
black Knurled Knob or the
Torque Wrench factory
calibration will be destroyed.
Do not rotate the Rotating
Handle Sleeve beyond or
below the maximum range
or the Torque Wrench factory
calibration will be destroyed.
Shown set for 42 ft-lbs
Shown set for 40 ft-lbs
Rotating Handle Sleeve
✓
Lock Knob
Rotate
✓
Rotate