Eastwood 31294 Скачать руководство пользователя страница 3

 

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

 

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

 

CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided, 
could result in minor or moderate injury.

 

NOTICE is used to address practices not related to personal injury.

 

 READ INSTRUCTIONS 

•  Thoroughly read and understand this manual before using. 
•  Save for future reference.

 

HEALTH AND INJURY HAZARD

• 

EYE INJURY HAZARD 

  This Sander will eject particles and contaminated 

water at high velocity during operation. Eye protection should be worn at  
all times when operating this tool. Use ANSI approved safety glasses. 
Everyday eyeglasses are NOT safety glasses.

• 

INJURY HAZARD 

  This Sander can quickly start up when handling  

while connected to an air supply causing serious personal injury.  
Always disconnect the Sander from the air supply before making  
adjustments, changing Sanding Discs or other maintenance.

• 

INJURY HAZARD

   Vibrating abrasive discs can quickly remove flesh.  

Keep hands and fingers away from sanding disc and always wear  
protective work gloves while sanding.

• 

INJURY HAZARD 

  Do not force tool or exert side forces on tool while 

sanding as the Sander body can suddenly kick back or twist causing severe 
hand or wrist injury. 

• 

INJURY HAZARD

   Keep loose clothing, jewelry and long hair away from 

rotating components as serious personal injury can occur.

• 

INJURY HAZARD

   Always make sure the workpiece being sanded is 

securely clamped or anchored to allow safe operation of the Sander.

SAFETY INFORMATION

The following explanations are displayed in this manual, on the labeling,  
and on all other information provided with this product:

To order parts and supplies: 800.345.1178  >>  eastwood.com 

3

Содержание 31294









Отзывы: