background image

To order parts and supplies: 800.343.9353  >>  eastwood.com 

3

 

 READ INSTRUCTIONS 

•  Thoroughly read and understand this manual before using. 
•  Save for future reference.

 

PINCH AND CRUSH HAZARD!

•  The Eastwood Press Brake Attachment consists of moving components  

that quickly generate extreme crushing force which can present a hand/fin-
ger pinch hazard and cause potentially serious injuries. Avoid pinching hands 
while handling. Keep fingers and hands away from moving parts  
when operating.

 

CUT HAZARD!

•  Handling sharp metal can cause serious cuts. Wear thick, well-fitting  

work gloves to prevent cuts from handling sharp metal.

 

EYE INJURY HAZARD!

•  Metal particles can be ejected from the metal surface when bending.  

Sheet metal edges and corners are sharp and can injure eyes.  
Always wear ANSI approved eye protection when operating this tool.

 

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

 

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

 

CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided, 
could result in minor or moderate injury.

 

NOTICE is used to address practices not related to personal injury.

SAFETY INFORMATION

The following explanations are displayed in this manual, on the labeling, and on all other information 
provided with this product:

Содержание 21560









Отзывы: