2
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
The
EASTWOOD PRESS BRAKE ATTACHMENT
is a precision engineered metal working tool designed
to produce accurate, variable length bends in angles up to 90°, in mild steel and aluminum, in widths
up to 12” [305mm] and thicknesses up to 3/8” [10mm]. Create complex shapes, such as floor
reinforcement channels and ribs, sections of corrugated pickup bed floors, truck bedside panels, inner
fender structures, suspension brackets, engine/transmission mounts and much more.
CONTENTS
(1)
Lower Die –
[A]
(1)
Base Plate –
[B]
(2)
Slide Posts –
[C]
(2)
Release Springs –
[D]
(1)
Upper Die –
[E]
(2)
M10 Nuts
(2)
M10 Washers
(2)
M8 x 20mm Bolts
(2)
M8 Washers
(4)
M8 Set Screws
SPECIFICATIONS
Attach to Most Standard 12 or 20 Ton Hydraulic Shop Presses.
Max. Bending Width: 12”
Bending Thickness (varies according to metal hardness & width of workpiece).
Mild steel and aluminum:
- 3/16” (5mm) x 12” [304mm] Width
- 5/16” (8mm) x 6” [152mm] Width
- 3/8” (10mm) x 3” [76mm] Width
Stainless:
- 1/8” (3mm) x 12” [304mm] Width
- 3/16” (4.8mm) x 6” [152mm] Width
- 1/4” (6.4mm) x 3” [76mm] Width
TOOLS REQUIRED
(1)
16mm wrench
(1)
6mm hex key
A
B
C
D
E
Material temper and hardness vary.
Always make a test bend with a scrap
piece before preforming the final bend.
