To order parts and supplies: 800.345.1178 >> eastwood.com
7
FIG. 4
FIG. 5
1.
Using a straight edge align the top of both Pulleys with one another
to ensure optimum performance.( Fig. 4)
2.
With the Pulleys aligned, tighten Set Screws.
3.
Loosen Motor Tension Bolt, pivot Motor up and install V-belt onto
Pulleys.
4.
Release the motor, allowing its weight to tension the V-belt, and
tighten the motor lock bolt.
5.
Slide work stop into place and tighten set screw
(FIG. 5)
.
6.
Before operating Bandsaw, it is recommended to square the vise
and table bed to the blade. Use a machinist’s square to ensure that
the blade is perpendicular to both the back side of the vise and the
bed of the table. Adjust as necessary.
