background image

To order parts and supplies: 800.345.1178  >>  eastwood.com 

3

The 

EASTWOOD PUNCH & BEAD DIE SETS

 will punch a clean hole and produce a smoothly 

radiused, raised bead in aluminum and mild steel in a choice of 4 sizes. 
This tool is designed to be used on single thickness sheet metal of thicknesses noted below.

FINISHED HOLE DIMENSIONS

#20533     1" Die Set

1" I.D. Hole x 1-1/2" Dia. x 0.05" High Bead

#20356     1.5" Die Set

1-1/2" I.D. Hole x 2" Dia. x 0.05" High Bead

#20534     2" Die Set

2" I.D. Hole x 2-1/2" Dia. x 0.05" High Bead

#20535     2.5" Die Set

2-1/2" I.D. Hole x 3" Dia. x 0.05" High Bead

MAXIMUM MATERIAL THICKNESS

Aluminum

14 Ga (.064")

Mild Steel

16 Ga (.060")

Stainless Steel

19 Ga (.044")

INCLUDES

(1)

  Bolt     

(2)

  Washers     

(1)

  Male Bead Die     

(1)

  Inner Cutting Die     

(1)

  Female Bead Die

OPERATION

PUNCH & BEAD

•  Determine the position and 

direction of the fi nished hole 
and bead.

•  Drill a ½" hole at the center of 

the location.

•  Firmly secure the work-piece.
•  Lubricate washers.
•  Assemble the tool in the order 

shown 

(FIG A)

 & 

(FIG B)

.

•  From left to right, stack two 

washers, Male Bead Die, and 
Inner Cutting Die onto the 
Bolt. Insert the end of the Bolt 
through the hole drilled in the 
work-piece. On the opposite 
side of the work-piece, thread 
on the Female Bead Die, 
with the mating cavity facing 
the Male Bead Die and Inner 
Cutting Die.

•  Tighten the Bolt by hand until 

resistance is felt.

•  Using a wrench or socket, 

continue to turn the Bolt until 
the material is pierced and 
the feature is formed.

•  Disassemble tool in 

reverse order.

FIG. A

FIG. B

Bolt

Inner 

Cutting Die

Female 

Bead Die

Male 

Bead Die

Work Piece

2 Washers

SAFETY INFORMATION

In this manual, on the labeling, and all other information provided with this product:

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

 

CAUTION used with the safety alert symbol, indicates a hazardous situation which, 

if not avoided, could result in minor or moderate injury.

 

READ INSTRUCTIONS 

 

Read this entire manual before set up and use of this tool. 
Save this instruction manual for future reference.

 

  INJURY HAZARDS

•  Do not use impact wrenches with this tool.
•  Always wear ANSI rated eye protection when using this tool.
•  Pinch Hazard! Keep fi ngers away from the moving parts when operating.
•  Wear appropriate work gloves and protective clothing. Sheet metal will often 

have sharp edges which can cause cuts to hands and arms.

  

  Never attempt to use this tool on materials thicker than those shown as 

serious tool damage can result.

2

 

Eastwood Technical Assistance: 800.544.5118  >>  [email protected]

Finished Result

Отзывы: