2
Eastwood Technical Assistance: 800.544.5118 >> [email protected]
Your
Eastwood Digital Electronic Torque-Angle Wrench
is a professional-quality tool designed
for performing quick precision work on all vehicles. With care, it will provide many years of
reliable service.
FEATURES
• Large back-lit display shows both target torque and real time reading.
• 3-color, Green-Amber-Red LED light and beeper tone provide visual and audible indication
of when target torque and angle is reached.
• High accuracy /- 2%.
• Units of torque measure are selectable for maximum fl exibility.
• Auto power off feature saves batteries.
• Memory storage accepts up to 5 sets of target torque settings.
SPECIFICATIONS
Drive:
1/2” square drive (12.5 mm)
Measuring Range:
15-148 lb/ft [2-20 kg.m] / 177-1770 lb/in [20-200 N.m]
Accuracy:
±2% of reading @ 10% to 100% of full scale.
Display Resolution:
1°
Units of Measurement:
lb/ft, lb/in, kg.m, N.m
Angle Range:
0° - 360° (C.W. / C.C.W.)
Angle Accuracy:
±1°
Display Resolution:
1°
Operating Voltage:
6V (4 x AAA batteries, supplied)
Operating Temperature:
32°F - 104°F [0° - 40° C].
DISPLAY
A:
Real-time torque value
B:
The unit of Angle
C:
Torque
units
D:
Target Torque indicator
E:
Target Angle indicator
F:
Memory storage numbers
G:
Battery indicator
H:
Peak / Track mode
I:
MINUS symbol for counter-clockwise rotation
D
E
A
B C
F
G
H
I
To order parts and supplies: 800.345.1178 >> eastwood.com
3
CONTROL PANEL
A:
Power ON / OFF button
B:
Memory storage numbers selection / setting button
C:
Memorize the torque or angle setting value / Change the
rotation of Angle in a CW or CCW direction / Enter
Program Settings Mode.
D:
Button to zero out the torque and angle values
E:
Button for display illumination / for selecting the next
decimal place / enter Angle measurement mode.
A
B
D
E
C
PREPARATION FOR USE
• Open the cover of the battery compartment by turning it counter-clockwise.
• Insert four AAA batteries as shown below
• Close the battery compartment by turning the cover clockwise.
• The torque wrench is now ready for use.
TURNING THE TOOL ON / OFF
• Press button to turn on. The buzzer sounds and all readouts on the display are shown at
the same time for just a moment.
• Press button again to turn off the unit.
PROGRAMMING SETTINGS
To enter Program Settings Mode, press the button. Once in the Program Setting Mode you can
make changes to the following settings.
PEAK AND TRACK MODE SETTINGS
After turning on the display, the unit automatically defaults to
“Track”
mode where the real-time
torque reached during operation will be displayed.
During the
“Peak”
mode, the maximum value reached will be saved and the value is shown on
the display for approx. 2 seconds. After that, the value fl ashes and you can continue to the next
application or press button to zero then keep going for the next application.
1.
Press button to select
“T”
for Track mode or
“P”
for Peak mode.
2.
Press button to confi rm the selection. The wrench will switch to
UNIT
setting
automatically.
NOTE:
If there is no button activity for 3 seconds, the wrench will retain the last selection of Peak or
Track mode, and return to measurement mode.
