To order parts and supplies, call 1-800-345-1178 or visit www.eastwood.com
13
MAINTENANCE
1
. Keep your Eastwood Dual Blaster clean, and protect it from damage.
2.
Release pressure from the tank after each use.
3
. When initially pressurizing, check for leaks at the tank top and at all hoses and fi ttings. Leaking
joints may be repaired by replacing worn or damaged parts and using tefl on tape at joints.
4.
Check for worn abrasive hose and fi ttings. The Abrasive Control Valve, manifold, and all parts
after the abrasive is ejected from the tank are subject to rapid wear due to the fl ow of abrasive.
Watch especially for leaks, blistering, bulging or thinness of the hose. Replace any parts which
appear worn.
SPECIFICATIONS
Tank Volume
.................10 gallons / 100 lbs. abrasive or 75 lbs. of soda media.
Hose Length
................8 ft. x 1/2” i.d.
Working Pressure
........60-125 psi
Air Consumption
.........6-25 cfm
AIR/ABRASIVE SUPPLY REQUIREMENTS
Hose ID
Hose L
Nozzle ID
Approx. Compressor HP CFM@125 psi
Abrasive Use/Hr
3/8”
50’
2
2
6
30 lbs.
3/8”
25’
2.5
4
12
80 lbs.
1/2”
50’
3
7
20
120 lbs.
1-1/2”
15’
3.5
10
25
150 lbs.
