Please read completely
before unpacking the
press.
Unpacking of crate:
Use a pry bar and hammer to remove the top and long side panel. Now the heat press can be
lifted out using a forklift. If a forklift is not available, remove all sides and use four people to lift
the heat press off one side at a time.
Inspect for internal damage:
If damage is present, please document with photos and send to
Tools needed:
Pry Bar
Hammer
Box Knife
Phillips head and flat head screw driver
Metric allen wrenches
Metric wrenches
12-24”Level
Содержание SOT-1220H
Страница 1: ...SOT 1220H Installation instructions ...
Страница 5: ...1 8ft orange air hose 3 relays 1 spare 1 solid state relay spare 1 fabric basket 1 chain cover ...
Страница 9: ...Step 3 install 55 media rollers leave loose for fitment 4 3cm 6mm bolts with washers ...
Страница 12: ...Step 7 Install media tensioners and idlers 12 2 5cm 4mm hex bolts bolts are found on the tensioners and idlers ...