Laminator BU-650II.PLUS & BU-865II.PLUS User Manual
Revised on Sep 16, 2013
Copyright © 2013 Eastsign International Limited
VI .Safety Precautions
1. Before using the machine, you should firstly read the machine’s manual to
comprehensively understand the main structure, performance and
technique. You should pay attention to all warning logo pasted on the
machine, to prevent accidents.
2. The power used by machine must be same as the power stated on the
nameplate and connected to earth.
3. The machine does not set optical protection switch. Operators in using the
machine should be carefully pay attention that don’t let your finger close
to the roller, to prevent your finger pressing.
4. If work is completed, you should raise the roller, to prevent the roller
deformation by pressing long time. At the same time, you should cut the
power supply.
5. Do not cut the film or picture on the roller to prevent scratching the roller
by sharp knives. After the roller is contaminated by glue, you can use
alcohol to clean the roller. It must not be organic solvents or water to
prevent the roller damaged and electrical short circuit.
6. The workplace should be dry and well ventilated, less dust, water.
Inflammable and explosive materials should not be stacked near the
equipment to prevent fire accidents.
7. Regular check on equipment and power cord.
