Adjustments and Replacements
1C7833 – July 1995
2–9
Replacement of a SOLENOID
[1] Do Steps 1 - 4(b) on Page 2–8 to remove the
DIVERTER.
Important
The PLUNGER can fall out of the SOLENOID when
you remove the SOLENOID from the SOLENOID
BRACKET.
[2] Remove the NUT, WASHER, and SOLENOID.
[3] Reverse the above steps to install the new
SOLENOID in the SOLENOID BRACKET.
When installing the SOLENOID BRACKET, do
the following:
(a) Check that the SOLENOID BRACKET is
inserted in the long hole in the SORTER
FRAME.
(b) Check that both ends of the SPRING are in
the grooves.
(c) When tightening the SCREW, hold the
SOLENOID BRACKET so that the notch is
fully seated around the locating TAB.
(d) Check that the wires of the SOLENOID are
in a position that will allow the SOLENOID
to operate correctly.
Figure 2–7
Replacement of the SOLENOID
H127_2017GA
H127_2017GCA
BRACKET
SOLENOID
NUT
WASHER
SOLENOID
PLUNGER
CONNECTOR
H127_2023HA
groove
groove
SORTER FRAME
notch
SCREW
TAB
DIVERTER
back
BEARING
front
BEARING
hole
long
CONNECTOR
SPRING
BRACKET
SOLENOID
SOLENOID
H127_2023HCC
Содержание Kodak X-Omat 180 LP
